Flexo Printing Machine

Basic Info

Product Description

1. IR Dryer
UV curing system
2. Turn bar
3. Tension control system(Mitsubishi of Japan)
4. Joint *Web-guiding
5. Laminate device
6. Waste wind-up device
7. Rotary Die-cut device
8. Wind-up tension control
9. Air shaft
10. Adjusting handle for left/right
11. 360 registration device
12. Flexo print unit
Note: The list which with * is the optional device

Basic work principle:
The printings input into printing set, which adopted up, middle and down equipment by carrier equipment. At the same time roll in the doctor and transmission ink to anilox roller. Using doctor that is at the anilox roller's upper left corner or the lower-right panel to scratch the ink, the ink in the gravure Mexican points of anilox roller are transmission to forme cylinder, then finish the ink transmission between the forme cylinder and impression cylinder, thronging admission Device output finished product.

CHARACTERISTIC:
1, Adopt the ceramic alinox cylinder to transfer the ink.
2, Unwinding and rewinding controlled by magnetic power brake, clutch.
(Or controlled by auto tension controller of Mitsubishi of Japan)
3, Printing unit adopt 360° Plate-adjustment each.
4, IR dryer for each printing unit.
5, The spare parts have a die-cutting station with the machine which made printing and die-cutting finished in one process.
6, The ink rollers will be separated from the printing roller, and keep running when the machine stopped.
7, The main motor is adopted frequency conversion for speed controlling.
8, Support paper from roll material, print, light, dry automatic alloy by infrared ray. Laminating and rewinding completed in one time. It is an ideal machine for printing trade in voice and top-grade adhesive label.